Facebook Instagram Linkedin
RESERVED AREA
US
AiM logo
HOME        PRODUCTS        DOCUMENTATION        PICTURES        SW/FW DOWNLOAD        CONTACTS        FAQ        NEWSLETTER
TECH SPECS | INSTALLATION        ACCESSORIES | SPARE PARTS         EVO4S VS EVO5        DOCUMENTATION        PICTURES
EVO5
The professional datalogger
EVO5 is the evolution of the traditional datalogger that, all over the years, has become a standard de facto acquisition system in a huge amount of championships. With its compact aluminum body, EVO5 can be easily placed in any vehicle.
Its configuration with the new RaceStudio 3 software is simple and immediate.
A wide range of sources for your data
EVO5 samples all the information you need: data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, from the GPS09c included in the kit.
And from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs.
Two digital outputs
EVO5 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE
type (switch to ground): they can be configured
in order to be turned on/off depending on
the value of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights, to activate/
de-activate a cooling fan or circulation pumps,
etc. when a certain event happens.
CAN output
With the CAN Output you can send messages
directly to an existing CAN network in order
to improve the range of vehicle control possibilities.
Internal SD card
The internal SD card (not included in the box) permits to record all possible data you may ever need.
The card is protected by a waterproof door equipped with a sensor closing all files when you open it, to prevent any data loss possibility. No way to have a faster data downloading: you remove the SD and... it is done!
Of course a USB connection is available, too.
Wi-Fi connection
Configure the system and download
your data over a secure 802.11 WiFi
connection, even if your car is 100
meters far from you.
Two multi-channel Motorsport
connectors
Two multi-channel Motorsport connectors: simple and straightforward, one top quality harness for ALL your connections.
A 37 pins connector for main applications (power, CAN, AiM CAN network, etc.) and a 22 pins connector for additional functions like CAN2, digital outputs...
Expand your EVO5 as much as you need
Add expansion modules via our built-in CAN bus:
Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
Channel Expansion
LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.
LCU-One CAN
SmartyCam 3 cameras
The on-board cameras that overlays on videos the data sampled
by your logger.
SmartyCam HD Rev.2
Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.
Memory Module
... and all sensors you may need to improve the EVO5 performance.
Connection example
Available displays
To visualize in real time all the data,
EVO5 can be connected to the visor
GS-Dash or to the Formula Steering Wheel 3,
our professional steering wheel
for Formula and Sports cars.
Download your data to a PC for a professional data analysis
Data recorded by EVO5 can be downloaded to PC and analyzed with the professional Race Studio Analysis software: graphs, histograms and tables will help you evaluate your performance, providing an objective support to avoid mistakes and improve your driving technique.