Facebook Instagram Linkedin
RESERVED AREA
US
AiM logo
HOME        PRODUCTS        DOCUMENTATION        PICTURES        SW/FW DOWNLOAD        CONTACTS        FAQ        NEWSLETTER
FREQUENTLY ASKED QUESTIONS
MYCHRON5/MYCHRON5 2T
CONFIGURING
Can I configure the temperature setting in Manual mode on MyChron5/5S?
How can I configure my MyChron5 LED bar?
How can I set the user information (driver name) if I cannot find the User Info icon into my MyChron5 main menu?
CHANNELS
Exhaust gas thermocouple (EGT) shows unexpected values.
How can I perform gear calibration on MyChron5?
How does MyChron5/2T associates temperature channels and their label?
My MyChron5 display shows EGT channel labelled as CHT: why?
Water temperature (WAT) shows unexpected values.
DEMO MODE
How can I activate my MyChron5 Demo Mode?
DOWNLOAD
Old files are overwritten by new ones.
I want to download data from MyChron5 using Data Key.
EXPANSIONS
I would like to see a second temperature channel (for example, EGT) on my MyChron5 display.
I would like to sample and show tires temperature on my MyChron5.
Which expansion modules are compatible with MyChron5?
How can I see data sampled by LCU-One CAN on MyChron5 display?
I sampled LCU-One CAN data: how can I read them properly?
How can I connect more expansion modules to my AiM device if the "CAN/EXP" cable (or EXP port on EVO4s) is already busy?
IDENTIFICATION
MyChron5 identified US (USA) and EU (Europe) are different? How can I recognize them?
INTERFERENCE
MyChron5 display is darkened, turns upside down, shows black lines and rolling numbers, turns off. What's going on?
The manual says to coil RPM cable many times, why AiM does not give this suggestion?
LAP FUNCTIONS
The track I'm racing on is not in RaceStudio 3. What can I do?
How does different LAP detection modes work?
How does MyChron5 display lap times?
What is "Blind Time" and how can I set it?
LED
How can I interpret my MyChron5/MyChron5 2T LEDs behavior?
ODOMETERS MANAGEMENT
How can I manage my MyChron5 odometers?
POWER SOURCE
Is it possible to power MyChron5 with an external battery?
Is It possible to recharge MyChron5 without removing the battery?
Why can't I overtake 90% of battery charge?
RaceStudio 3
I can't transmit logos to MyChron5.
SENSORS MANAGEMENT
How can I manage the sensors connected to MyChron Expansion?
WI-FI
MyChron5 doesn't show Wi-Fi mode: "ON". Why?
I can't remember the password and I can't access to MyChron5.
Which types are allowed when in the SSID and in the password settings?
Even though my PC is correctly connected to one AiM device via Wi-Fi, the User Interface of RaceStudio 3 does not report it. Any idea about this issue?
When I use RaceStudio 3 from a virtualized WindowsT on MacT OS, the device connected via Wi-Fi may show different behaviors (it is quickly viewed / takes some time to be displayed / does not appear): why?
< Back