Cobra¶
2025¶
0.5.44 - March, 12th 2025¶
Changes¶
Added management of purge valve on Honda 450 X , KTM EXC-F models and Husqvarna FE models
Added management of p_pair valveon Honda 450 X model
Fixed management of main relay of Honda 450 X model
Corrected a bug related to second injector management of Kawasaki KX 250 models from MY22
0.5.43 - March, 3th 2025¶
Changes¶
Added 2025 Bike Model Management
Added Management of new HBS2
Added MAP Led feedback for LC strategy for Honda 450 from MY21 and 250 from MY22 ,and Kawasaki 450 from MY24 and 250 from MY25
Added Speed Limiter strategy for MotoStudent MY23 project (Map Update needed)
Enable second injector during LC if is configured
2024¶
0.5.39 - May, 10th 2024¶
Changes¶
Fixed a bug ralted to bad management of stock KTM Husqvarna GasGas handlebar switch.
2023¶
0.5.35 - December, 14th 2023¶
Changes¶
Forced usage of automatic calculation strategy in case of fault of external barometric sensor.
0.5.34 - September, 19th 2023¶
Changes¶
Added map change event to software. Available this feature from ver : 1.2.56.0 of Spark
0.5.33 - July, 28th 2023¶
Changes¶
Add possibility to configure Spare channels input for barometric pressure calculation
0.5.32 - June, 29th 2023¶
Changes¶
Changed the management of handle bar heater made by spare channel output
Fix a bug related to quick shift engagement with Aim handle bar switch connected on ktm and husqvarna from MY23
0.5.30 - April, 13th 2023¶
Changes¶
Added electric water pump management. Compliant only with : BOSCH PWM (code 0 392 023 232) or (code 0 392 023 454)
Added quick shifter sensitivity management for KTM SX-F MY23
Added quick shift management also in transition from 1st to 2nd gear for KTM SX-F MY23
0.5.29 - February, 24th 2023¶
Changes¶
Added quick shifter button sensitivity management
Added quick shifter operation mode selection
Added barometric offset value compensation during automatic mode
2022¶
0.5.26 - December, 21th 2022¶
Changes¶
Added support of Honda CRF 450 X model
Fixed a bug related to crank correction that appear when UC bridge was connected to ECU
Optimized automatic barometic calculation algorithm
Fixed a bug related to manual throttle calibration on bike that has external power on key
0.5.24 - October, 28th 2022¶
Changes¶
Add support of MY 2023 bike
Insert the possibility to bypass quickshift cut with 0 value entry in quickshift time table
0.5.22 - July, 28th 2022¶
Changes¶
Fixed a bug that did not allow the manual throttle calibration on the bike
0.5.21 - July, 21th 2022¶
Changes¶
Add RPM compensation table for injection transient correction
Add two position map switch management
Improved ecu temeprature calculation
Improved analog sensors reading
0.5.19 - June, 10th 2022¶
Changes¶
Add management of the new ktm 22.5 handle bar switch
Introduced one shot barometric pressure calculation option
Introducet Mil light fault code management
Disable throttle calibration on-bike for KTM / Husqvarna enduro bike models
0.5.17 - May, 03rd 2022¶
Changes¶
Add Fuel level consumption calculation for Honda 450L models
Corrected the management of launch control in Neutral strategy
Add speed density usage flag
Filtered channels of air temperature and water temperature measures at 1Hz
Correct the managemnt of fuel pump re-arm